Precision exterior lighting by We-ef

Click to enlarge
We-ef’s FLC100 LED projector, fixed.

We-ef’s FLC100 LED projector, fixed.

1 of 3
We-ef’s FLC100 LED projector on the Rail66.

We-ef’s FLC100 LED projector on the Rail66.

2 of 3
We-ef FLC100 LED projector features water-sealed aluminium casing.

We-ef FLC100 LED projector features water-sealed aluminium casing.

3 of 3

New LED projectors and accessories for precision exterior lighting.

German precision architectural lighting manufacturer We-ef introduces new FLC100 LED projectors using a high-efficiency lens system for lighting architectural features externally. The projectors have a symmetric lens system delivering precise lighting ranges – wide, medium, very narrow and very narrow with sharp cut-off beam distributions – for lighting buildings, facades, monuments and sculptures.

The projectors can operate independently of each other on outreach arms or the tailored rail system, and can be fitted with optical accessories such as diffuser, spread lens and glare shield to expand the spectrum of lighting design possibilities.

And now for the technical stuff.

The largest of the new projectors (FLC141 LED) is 440 mm high x 80 mm deep. It has 3570 lumens with five colour temperatures (3000 k, 4000 k, red, green and blue). The FLC131 LED has a luminous flux of up to 2324 lumens and the FLC121 LED has a luminous flux of up to 1162 lumens.

With corrosion-resistant aluminium castings, the projectors meet the requirements of IP66 protection for weather-resistance, water sealing and thermo-management of the LEDs.


More products

Top of the class: Intergrain

Top of the class: Intergrain

Intergrain products have elevated the inherent qualities of plywood and Tasmanian oak, which were used in this project by Architectus.

Most read